Kolner Instacoll
Instacoll Kolner can be applied with a brush or airbrush. For manual application with a brush, a soft synthetic brush is recommended. Before application, the product must be diluted with water as much as necessary to obtain an application without lines of the brush, a dilution of 20% or 30% - 40% -50% or greater may be sufficient (the more the product is diluted the lower the resistance to gilding). It is recommended to apply several overlapping layers when the previous one is dry (at least 3-4 coats). It is advisable to apply a turapori on the plaster before applying the product instacoll. When you get to the application of the final coat you will have to wait, like a normal 3-hour mission, for the product to be just dry to apply the gold leaf (the time available is about 30-40 minutes). Subsequently, about 1 hour, it will be possible to pass over the leaf with a soft fabric (Kolner fabric) to better polish the leaf and increase the shiny effect.
To remove the product, use petroleum gasoline
| Kolner Instacoll base yellow ml.100 | Stock: 21 - COD. V0274 | |||
| € 21,50 |
|
|||
| Kolner Instacoll base clear ml.100 | Stock: 14 - COD. V0275 | |||
| € 21,50 |
|
|||
| Kolner Instacoll base yellow ml.500 | Stock: 3 - COD. V0303 | |||
| € 75,00 |
|
|||
| Kolner Instacoll base clear ml.500 | Stock: 4 - COD. V0313 | |||
| € 75,00 |
|
|||
| Kolner Instacoll base clear ml.1000 | Stock: 1 - COD. V0616 | |||
| € 131,00 |
|
|||
| Kolner Instacoll system base yellow ml.1000 | Stock: 2 - COD. V0312 | |||
| € 131,00 |
|
|||
